Protection:
- The suction pad sits inside a durable aluminium housing for a very stable vacuum.
- The holder stays in place after attachment, which helps prevent abrasion and scratches on the glass.
Comfort:
- You can position two glass panes quickly at a 90° angle.
- Fine adjustment is possible after positioning.
- The holder keeps the panes even while the adhesive cures, so you don’t need to hold them by hand.
Hygienic Design:
- The enclosed suction pad is shielded from dirt and damage.
- The pads stay in good condition when stored correctly.
Precision Fit:
- The alignment adjustment range is ±3 mm.
- You can set the bonding gap exactly using feeler gauges.
- The stable vacuum gives reliable, accurate bonding results.
Versatile Use:
- Suitable for small, lightweight glass objects up to 30 cm high.
- For wider panes, use one holder every 30 cm.
- Ideal for glaziers, glass processors, and display and showcase builders.
- This is a positioning aid only and is not suitable for carrying glass.
Bohle Verifix® angle suction holder, aluminium BO633.10L
The Bohle Verifix® angle suction holder, aluminium BO633.10L is used to fix glass-to-glass edge bonding. It lets you position two glass panes quickly and accurately at a 90° angle. It is designed for small, lightweight glass objects up to 30 cm high, and it keeps the panes perfectly even while the adhesive cures. After positioning, you can adjust the alignment within a range of ±3 mm. You can also set the bonding gap exactly using feeler gauges.
The suction pad sits inside a durable housing, which keeps the vacuum very stable for reliable, precise results. For wider panes, place one angle suction holder every 30 cm. This bonding tool suits glaziers, glass processors, display and showcase builders.
Please note that it is a positioning aid only and is not suitable for carrying glass. Store it so the suction pads stay protected.
Once it is attached, do not move it, to avoid scratching the glass
£169.00
