Sold : 90In Favorites : 4
| Application area | Glass, Indoor, Metal, Plastic |
| Colour | Transparent |
| Consistency | Liquid |
| Content | 50 ml |
| Durability | See label |
| E-modulus | 462 MPa |
| Flash point (°C) | 10 °C |
| Hardening mechanism | 2-component |
| Hardness | 55 Shore D |
| Layer thickness | 0.2 – 0.8 mm |
| Linear shrinkage | 0.8 % |
| Material | Acrylic |
| Mixing ratio | 1:1 |
| Package contents | 1 Cartridge |
| Shear strength | 21 MPa |
| Solvent-free | Yes |
| Storage information | Protect from sunlight, Store cool, Store dry, Store in original container |
| Storage temperature (°C) | 20 – 25 °C |
| Surface bonding | No |
| Temperature resistance (°C) | -30 – 150 °C |
| Viscosity | 5,000 mPas |
| Waterproof | No |
Verifix® 2-K-60 2 Component Structural Adhesive
Various materials can be bonded quickly and without further aids with 2K-60. The two-component structural adhesive is suitable for glass, metal, ceramics and some plastics. 2K-60 has high strength, good temperature resistance and a clear appearance.
Curing is done by mixing the two components. The use of a UV lamp is not necessary. The pot life begins when both components combine in the mixing nozzle. Therefore, a new mixing nozzle must usually be used for each bond. 2K-60 is not moisture resistant. For bonding in bathrooms, Pyrosil® should be used beforehand
- Applicable with mixing nozzle BO 5500541 and dispenser BO 5500502.
BO5500540
datasheet TD_Verifix 2k-60_840.200.007.pdf
£30.25
