Adhesives
Showing all 14 results
-
Adhesives, Adhesives and Tapes
10 pcs. static mixer FIS Mixer Red fischer Installation mortar FIS VL 300 T
Adhesives, Adhesives and Tapes10 pcs. static mixer FIS Mixer Red fischer Installation mortar FIS VL 300 T
Total sales: 0 pcs.The fischer static mixer FIS MR Plus is the perfect tool for mixing fischer injection mortar. It provides forced mixing of hardening agent and resin components, ensuring a perfect mix every time. With a capacity of up to 10 pcs. per mixing cycle, the FIS MR Plus is the most efficient static mixer on the market.
SKU: 840.200.201 -
Adhesives, Adhesives and Tapes
12pcs DP 2-K adhesive EPX QUADRO static mixer 4:1 and 10:1
Total sales: 0 pcs.The 3M™ SCOTCH-WELD™ DP 2-K Adhesive EPX QUADRO Static Mixer is the perfect tool for mixing two-component adhesives. With a 4:1 and 10:1 mixing ratio, it is ideal for use with 3M-Scotch-Weld DP8810NS and DP8010 adhesives. The static mixer nozzle is made of durable materials and provides a consistent, even mix every time.
SKU: 840.200.002 -
Adhesives, Adhesives and Tapes
Dispenser for Verifix® 2K-60 Bohle structural adhesive/ Cartridge Gun
Total sales: 3 pcs.The dispenser is a manual 2K dispensing gun for double cartridges with a total volume (A+B) of 50 millilitres. The mixing ratio is 1:1. It is suitable for professional application of the adhesive Verifix®2K-60
BO5500502
datasheetTD_Verifix 2k-60_840.200.007.pdf
SKU: 840.200.008 -
Adhesives, Adhesives and Tapes
DP105 2-K Adhesive transparent 45ml for glass/metal
Total sales: 0 pcs.The 3M™ Scotch-Weld™ DP 105 is a strong and flexible 2-component construction adhesive that is perfect for bonding glass to metal in applications with large temperature fluctuations. The adhesive has a 1:1 mixing ratio and provides maximum strength under challenging conditions. It is also perfect for bonding different materials together, such as plastics, metals, and glass. The adhesive is transparent, making it perfect for applications where aesthetics are important. The DP 105 is also easy to use, with a simple mixing ratio and minimal preparation required. With its high strength and flexibility, the DP 105 is the perfect adhesive for a variety of applications.
SKU: 840.200.004 -
Adhesives, Adhesives and Tapes
DP8010 2-K Adhesive Green 45ml for Glass/Metal
Total sales: 0 pcs.The DP8010 2-K Adhesive Green 45ml for Glass/Metal is the perfect solution for bonding low energy plastics such as PE, PP, and TPE without surface pre-treatment. With a short working time and high bond strength, this adhesive is also suitable for bonding other plastics, composites, metals, glass, wood, and more.
SKU: 840.200.003 -
Adhesives, Adhesives and Tapes
DP8810NS 2-K Adhesive Green 45ml for Plastic/Metal
Total sales: 0 pcs.The 3M™ Scotch-Weld™ DP 8810 NS is a high-strength adhesive that is perfect for bonding plastics and metals. The viscoplastic product has a 10:1 mixing ratio and is characterized by very high impact strength and very good tensile shear strengths. It is also flame retardant and suitable for high-strength bonding of plastics such as ABS, PC, PMMA and PVC, as well as metals and powder coated surfaces. The adhesive contains glass beads (diameter 250µ) to adjust the adhesive layer thickness.
SKU: 840.200.001 -
Adhesives, Adhesives and Tapes
Fischer Injection mortar FIS VL 300 T
Total sales: 0 pcs.The fischer Installation Mortar 300 T is a 2-component injection system based on vinyl ester. Resin and hardener are not mixed and activated until they are squeezed out of the static mixer. The assembly mortar can be applied particularly economically with a standard sealant squeeze gun. Opened cartridges can be reused with a new static mixer. With approved system components such as FIS A anchor rods, internal threaded anchors and injection anchor sleeves for fastening in concrete and masonry, the hybrid system offers many application options for interior and exterior use.The price includes 2 static mixers each. For larger quantities, please inquire.
SKU: 840.200.200 -
Adhesives, Adhesives and Tapes
Mixing nozzle Verifix® 2K-60 Bohle
Total sales: 1 pcs.Matched to the 2K-60 adhesive, this mixing nozzle ensures the correct mixing ratio of the two components. Only in this way can the adhesive achieve its full strength and the bond a good quality. A new a mixing nozzle will be required for each bond, as the mixing and curing process starts within the nozzle.
Application note:
Observe the processing instructions of the adhesive and the relevant technical guidelines and standards.BO5500541
SKU: V840.200.006 -
Adhesives, Adhesives and Tapes
Pyrosil® Professional Kit
Total sales: 0 pcs.The Pyrosil manual flame treatment set is a surface silicatisation appliance that works on the principle of flame pyrolysis. A gas mixture of (propane and butane) and PYROSIL®, consisting of organosilicon compounds, burns in the flame and forms a very dense and firmly adhering SiO2 layer a few nanometres thick on metal, glass, ceramics and plastics.
Particularly suitable as an adhesion promoter for adhesives, UV bonding and UV printing on smooth surfaces.
Available in variations especially for UV bonding or UV bonding
SKU: V840.100.001 -
Adhesives, Adhesives and Tapes
Verifix® 2-K-60 2 Component Structural Adhesive
Total sales: 8 pcs.Various materials can be bonded quickly and without further aids with 2K-60. The two-component structural adhesive is suitable for glass, metal, ceramics and some plastics. 2K-60 has high strength, good temperature resistance and a clear appearance.
Curing is done by mixing the two components. The use of a UV lamp is not necessary. The pot life begins when both components combine in the mixing nozzle. Therefore, a new mixing nozzle must usually be used for each bond. 2K-60 is not moisture resistant. For bonding in bathrooms, Pyrosil® should be used beforehand
- Applicable with mixing nozzle BO 5500541 and dispenser BO 5500502.
BO5500540
datasheet TD_Verifix 2k-60_840.200.007.pdf
SKU: 840.200.007 -
Adhesives, Adhesives and Tapes
HIGH TACK Den Braven 290 ml
Total sales: 0 pcs.The HIGH TACK Den Braven 290 ml is a hybrid adhesive with particularly strong initial adhesion. Zwaluw High Tack is a one-component hybrid-based adhesive with high initial tack. In general, a fixation of the adhesive unit is not required. After application, the product hardens with atmospheric moisture. The adhesive is odorless, neutral and free of silicone and isocyanate. Good for gluing painted glass backs or mirrors. Not negligent to the joints and HIGH TACK Den Braven 290 ml.Tonality is friendly..
SKU: 600.120.005 -
Adhesives, Adhesives and Tapes, Mirror Fitting, Mirrorglue
Mirror Adhesive Xtragrip® Cartridge × Mirror Adhesive Xtragrip® 310ml
Adhesives, Adhesives and Tapes, Mirror Fitting, MirrorglueMirror Adhesive Xtragrip® Cartridge × Mirror Adhesive Xtragrip® 310ml
Total sales: 0 pcs.Looking for a product that will allow you to bond mirrors to surfaces without the worry of them breaking or coming loose? Look no further than Mirror Adhesive Xtragrip®. This solvent-free, neutral one-component adhesive is based on silicone and is perfect for stress-compensating mirror bonding on wood, concrete, stone, glass, metal, and more. Porous surfaces must be pretreated with a primer, but other than that, Xtragrip® is easy to use and provides a permanent, elastic bond that won’t attack the mirror coating
Technical characteristics:
Base: polysiloxane (oxymfrei).
Consistency: stable paste
Hardening system: polymerization by humidity
Skin formation: approx. 10 min. (+ 20 ° C and 65% relative humidity) Curing speed: 1 mm / 24 hrs. (+ 20 ° C and 65% relative humidity) Density: 1.36
Thermal stability: -50 ° C to + 120 ° CSKU: 600.120.001 -
Adhesives, Adhesives and Tapes
Pyrosil – Addons
Total sales: 0 pcs.Pyrosil is the perfect solution for protecting surfaces from moisture. It can be applied to metal and glass surfaces, forming a protective barrier that will keep your surfaces looking like new. Pyrosil is easy to apply and dries quickly, making it the perfect solution for use in areas where moisture is a problem, such as bathrooms and kitchens.
SKU: 840.101.000 -
Adhesives, Adhesives and Tapes, UV Bonding
UV-Glue Verifix B 665-0
Total sales: 0 pcs.Verifix B 665-0 is the suitable adhesive for objects for interior use, that are not exposed to UV light or moisture, and are permanently in sited one place. It can absorb high static loads. Due to short curing times and less time-consuming post-cleaning, production can be carried out efficiently.
- Not suitable for toughened safety glass or laminated safety glass. Not suitable for damp locations or outdoor use.
datasheet TD_ B 665-0.823.655.000.pdf
BO5209300 -100g
BO5209327 -20g
SKU: 823.655.000
