1L primer for glass painting
Glass primer primer for glass painting is required as preparation for 2K paint on glass. The primer prevents chipping of paint on the glass after drying. 2nd step when painting on glass.
Please Contact us if you need any assistance or information on Paintin on Glass commercially
Drucken
For painting glass in interior fittings.
Before painting with 2-component paint or the like, use a lint-free clean cloth to apply the primer regularly to the glass.
See also Process Technical Information Sheet VTM4118 “Recommendations Glass Coating”.
You may also like…
-
Health & Safety, Respiratory Protection
Standard FFP3 fine dust mask with fold – 5 pcs
Dust mask FFP3, with exhalation valve adjustable nose bridge for better fit low exhalation resistance for high wearing comfort with sealing lip and with adjustable harness. Protects up to 30 times the MAK value
SKU: 200.500.005 -
Health & Safety, Gloves
Nitrile Pack of 100 Disposable glove unpowdered
Made of NBR (Nitrile Butadiene Rubbers), our disposable gloves provide the next level of hand protection because Nitrile Disposable Gloves eliminates the risk of natural rubber allergy, textured fingertips provide excellent grip and feel for both wet and dry objects.
SKU: 200.100
Related products
-
Mirror Fitting, Surface Technology, Films
Tesa splinter protection film for mirror 330μ 25m roll
TESA – Splinter protection film for application on the back of the mirror. Ideal for large mirrors or semi-public areas. If the mirror should break, the foil standard EN 12600 raises the splinters together. Not recommended for overhead glazing.
Application in
Gyms,
Showrooms
Hotel and exhibition construction
ship
Available in following versions:300m x 25m
500mm x 25mSKU: n/a -
Surface Technology, Masking
Professional Gold Masking Tape
Fine masking tape that is versatile.
Made of extra thin acrylate, for precise work, edge sharp edges
Preventing underflowing colors or primers etc.
Ideal on slightly uneven surfaces.
Can be removed up to 10 days without any problems.
Short term temperature resistant (60- 90 min) to +120? C.
Suitable for covering glass edges before painting.SKU: 400.200.000 -
Installation Needs, Handling and Packing, Suction Lifters, Surface Technology
Vacuum Suction Covers for Suction Plates / White
Installation Needs, Handling and Packing, Suction Lifters, Surface TechnologyVacuum Suction Covers for Suction Plates / White
Vacuum Suction Covers are convenient where there should be no fine scratches or dirt on the glass. Is essential for scratch sensitive glasses. Suitable for use in manufacturing, processing transportation and assembly such. B. In the glass and solar industry. Suitable for suction plates D120, D150 and D300.
SKU: V300.125.000 -
Surface Technology, Clean
Polishing felt D80 for Hand Drills
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
SKU: 750.000.001
