Adjustable spanner wrench with 2.3mm and 2.8mm pin
The universal face wrench with spigot is used to assemble or disassemble point holders or similar fastening parts. The interchangeable pins have a diameter of 2.3 mm and 2.8 mm, the distance between them is adjustable. The maximum distance when the key is fully open is 50 mm, while the distance between the pins in the closed position is 10 mm.
Drucken
Face wrench straight with 2.3mm and 2.8mm spigot for various Pointfixures 10mm to 50mm openinig
| Weight | 125 g |
|---|---|
| Dimensions | 200 × 30 × 20 mm |
| Made in | Europe |
| Material | Stainless steel |
Related products
-
Fittings for Glass, Mirror Fitting, Mirrorplates
1.6m2 Flapped Professional Plus Mirror Set
For up to 1,6m² mirror surface.
– With 2 fastening straps
– 2 washers
– 2 snaps
– 2 self-adhesive, three-sided tilted mirror plates 100 x 200mm.
The mounting accessories such as screws, Wall plugs and spacers is enclosed. Profi-Plus coating.SKU: 600.102.016 -
Fittings for Glass, Mirror Fitting, Mirrorplates
Mirro Eyelet plate quad. 45 x 45 x 1 mm WITHOUT ADHESIVE
Fittings for Glass, Mirror Fitting, MirrorplatesMirro Eyelet plate quad. 45 x 45 x 1 mm WITHOUT ADHESIVE
Adhesive sheet smooth 1mm, uncoated. Moisture proof, good adhesion,
– UV and plasticizer resistant,
high temperature resistance,
– solvent and chemical resistance,
– Splash water resistance
– square eyelet plate 45 x 45 x 1mm,
– Available with or without self-adhesive.SKU: 600.100.003 -
Pointfixures, Fittings for Glass
Point Fixture 30xD25 with cylinder head screw
High-quality point holder made of stainless steel V2A / EN 1.4301 / AISI 304. Matt brushed. Suitable for glass thickness 8-12 mm including rubber inserts. An M8 thread is available for mounting. Excluding fastening /mounting material. Suitable for Outdoor/ Indoor fixing. The Point stud is not adjustable on the axis.
SKU: 640.000.230
