BriteGuard® Surface ACTIVATOR – Step 1
The Activator is for the pre-cleaning of smooth glass / glass ceramic surfaces before coating with Surface SEALER.
This is the 1st step for the surface coating
Delivery time: about 2-5 working days
Drucken
The Activator is for the pre-cleaning of smooth glass / glass ceramic surfaces before coating with Surface SEALER.
This is the 1st step for the surface coating
Delivery time: about 2-5 working days
Related products
-
Surface Technology, Clean
Polishing felt D80 for Hand Drills
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
SKU: 750.000.001 -
Surface Technology, Films, Sand Blasting
Sandblast film 180 μm roll – 25m x 125 cm
The stencil film for sandblasting with higher beam depths, ideal for relief structures, logos, lettering with sharp contouring
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and medium beam depth up to 2.0 mm
Delivery time: about 2-5 working days
SKU: 700.310.181 -
-
Surface Technology, Films, Sand Blasting
Sandstrahlfolie 100 µm – 70 cm x 100 cm (10 Pcs.)
For transferring plotter templates
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and low beam depth up to 0.5 mm
Delivery time: about 2-5 working days
SKU: 730.310.002, 730.310.002
