BriteGuard® Surface FINISHER – 1 Liter
For easy removal of residue after coating with Surface SEALER.
3rd step for the BRIGHT GUARD treatment
Shipping: about 2-5 working days
Drucken
For easy removal of residue after coating with Surface SEALER.
3rd step for the BRIGHT GUARD treatment
Shipping: about 2-5 working days
Related products
-
Surface Technology, Clean
Polishing felt D80 for Hand Drills
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
SKU: 750.000.001 -
Surface Technology, Nano Coating
BriteGuard® for smooth surfaces
The coating can be applied manually or with a sprayer suitable for flammable liquids. For manual coating, cotton pads or similar can be used.
Always apply the coating in cross moves to make sure that enough material has been applied everywhere. Pay special attention to edge areas or areas around holes or cutouts. BriteGuard® Surface SEALER has a short reaction time of only 30 minutes at approx. 20 ° room temperature.
If required, this can be flexibly adapted to the production cycle times due to the effect of temperature.
Consisting of 3 components
TÜV certified for up to 10 years
These products are no loger available:
SKU: n/a -
Surface Technology, Sand Blasting
High Grade Corundum Sandblasting Agent
High quality abrasive · smooth blasting pattern and soft transitions · low dust loss rates
- High grade corundum forms part of the group of electric corundums. It is made of aluminium oxide in a reducing melting atmosphere of an electric arc furnace. High grade corundum is non-ferrous, extremely stable and has the highest degree of purity.
- Colour white
- 25 kg sack
- iron-free
SKU: 700.300.100 -
Surface Technology, Nano Coating
BriteGuard Express
Refine your showers quickly and easily with BriteGuard Express before installation. The protected glass surface is directly protected and easy to clean. So your customer will enjoy the high-quality shower for a long time. The application is very simple: the special liquid is simply applied uniformly to the clean glass surface and wiped off with a cloth.
Care must be taken only that the surfaces are wetted completely and evenly.
The protective effect occurs immediately. The one-step product is suitable for indoor and outdoor use. It can be used as effectively on glass showers and dividing walls as on conservatory doors. The protective effect lasts much longer than with comparable temporary products.
SKU: 700.100.000
