Craftline Diamond Core Drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– The drill must be sharpened before first use
– Made in China
In stock
Craftline Diamond Core Drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– The drill must be sharpened before first use
– Made in China
£ 94.55 £ 157.00 ex.VAT
In stock
Craftline Diamond Core Drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– The drill must be sharpened before first use
– Made in China
Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
German quality brand
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
The Diamond hollow drill 1/2″ H75 mm D 11mm to D 20mm drill is a standard diamond bur that is 75mm high with a 1/2″ thread. It is made of steel with a diamond coating of sintered material. The drill must be sharpened before first use. It is made in Italy and has an HS code of 8207.
The Diamond hollow drill 1/2″ H75 mm D 51mm to D60mm is a standard diamond bur 75mm high with 1/2 “thread, for normal use. With internal cooling, base material: steel, diamond coating of sintered material, drill must be sharpened before first use. Made in Italy. HS code for reference: 8207.
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
glasstec.net
Any questions related to Craftline diamond hollow drill 1/2 “H 75 mm D 90 on glasstec.net?
WhatsApp Us
we are online | privacy policy