Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
£ 74.90 £ 123.50 ex.VAT
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
The Diamond hollow drill 1/2″ H75 mm D 51mm to D60mm is a standard diamond bur 75mm high with 1/2 “thread, for normal use. With internal cooling, base material: steel, diamond coating of sintered material, drill must be sharpened before first use. Made in Italy. HS code for reference: 8207.
The diamond hollow drill is a standard diamond bur 75mm high with 1/2 “thread. It is for normal use and has internal cooling. The base material is steel and the diamond coating is of sintered material. The drill must be sharpened before first use. It is made in Italy and the HS code for reference is 8207.
The Diamond hollow drill 1/2″ H75 mm D 51mm to D60mm is a standard The Diamond Hollow Drill is a standard diamond bur that is 75mm high with a 1/2″ thread. It is made of steel with a diamond coating of sintered material. The drill must be sharpened before first use. It is made in Italy and has a HS code of 8207.
glasstec.net
Any questions related to Craftline-Diamond hollow drill 1/2″ H75 mm D 70 on glasstec.net?
WhatsApp Us
we are online | privacy policy