Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
In stock
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
£ 92.43 £ 153.50 ex.VAT
In stock
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
3350 x 100 eg. Ashton Belt Grinder
2000 x 100 eg. Metral Belt Grinder
1830 x 100 eg. Bohle Belt Grinder
2400x 100 eg. Ebor Belt Grinder
3000 x 100 eg. Knopp Belt Grinder
1800 x 100 eg. Glasmek Belt Grinder
Grit: 60, 80, 100, 120, 150, 180,220, 400, Cork
Craftline Diamond Core Drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– The drill must be sharpened before first use
– Made in China
The diamond hollow drill is a standard diamond bur 75mm high with 1/2 “thread. It is for normal use and has internal cooling. The base material is steel and the diamond coating is of sintered material. The drill must be sharpened before first use. It is made in Italy and the HS code for reference is 8207.
Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in China
glasstec.net
Any questions related to Craftline-Diamond hollow drill 1/2″ H75 mm D 88 on glasstec.net?
WhatsApp Us
we are online | privacy policy