D120 Vacuum Suction Covers for Suction Plates / White

Related products
-
Surface Technology, Sand Blasting
High Grade Corundum Sandblasting Agent
0 out of 5(0)High quality abrasive · smooth blasting pattern and soft transitions · low dust loss rates
- High grade corundum forms part of the group of electric corundums. It is made of aluminium oxide in a reducing melting atmosphere of an electric arc furnace. High grade corundum is non-ferrous, extremely stable and has the highest degree of purity.
- Colour white
- 25 kg sack
- iron-free
SKU: 700.300.100 -
Surface Technology, Sand Blasting
Sandblasting agent 25kg
0 out of 5(0)Normal corundum brown belongs to the group of Electro Corundum. It is produced by reducing melt of calcined bauxite in an electric arc furnace. Normal corundum is iron-free and extremely stable.
Shipping: about 2-5 working days
Colour : Brown
SKU: 700.301.000 -
Surface Technology, Nano Coating
BriteGuard® for smooth surfaces
0 out of 5(0)The coating can be applied manually or with a sprayer suitable for flammable liquids. For manual coating, cotton pads or similar can be used.
Always apply the coating in cross moves to make sure that enough material has been applied everywhere. Pay special attention to edge areas or areas around holes or cutouts. BriteGuard® Surface SEALER has a short reaction time of only 30 minutes at approx. 20 ° room temperature.
If required, this can be flexibly adapted to the production cycle times due to the effect of temperature.
Consisting of 3 components
TÜV certified for up to 10 years
These products are no loger available:
SKU: n/a -
Installation Needs, Handling and Packing, Handling Aid, Suction Lifters
3 point aluminum Suction Lifter
Installation Needs, Handling and Packing, Handling Aid, Suction Lifters3 point aluminum Suction Lifter
0 out of 5(0)Robust aluminum suction-lifter with 3 suction cups for carrying and lifting different loads. Suitable for all materials with a flat and gas-tight surface. The suction-lifter must be pressed firmly against the surface to be sucked with a relaxed rubber disc. When turning the rocker arm, the resistance of the vacuum generation must be clearly noticeable.
SKU: 300.103.080