End caps for U-profile 12×18.5×4
End caps for U-profile 12×18.5×4 Anodized
End caps for U-profile 12×18.5×2 Art. 601.012.181 and 601.012.184

Related products
-
Fittings for Glass, Mirror Fitting, Mirrorplates
1.6m2 Flapped Professional Plus Mirror Set
0 out of 5(0)For up to 1,6m² mirror surface.
– With 2 fastening straps
– 2 washers
– 2 snaps
– 2 self-adhesive, three-sided tilted mirror plates 100 x 200mm.
The mounting accessories such as screws, Wall plugs and spacers is enclosed. Profi-Plus coating.SKU: 600.102.016 -
Pointfixures, Fittings for Glass
4 pcs Standoffs 35x D19 for boards and signs
0 out of 5(0)Stainless steel 204 Advertise Fixing Pin also known as Glass Standoff or Mounting Bolt for signs, boards and point fixing has a brushed finish and is suitable for 3 to 10 mm glass or similar plates and boards which is mounted with the included M8 Screw. This item is not suitable for outdoor or statically demanding application. Sales unit is 4 Pcs.
SKU: 604.035.019 -
Fittings for Glass, Mirror Fitting, Mirrorplates
Mirro Eyelet plate quad. 45 x 45 x 1 mm WITHOUT ADHESIVE
Fittings for Glass, Mirror Fitting, MirrorplatesMirro Eyelet plate quad. 45 x 45 x 1 mm WITHOUT ADHESIVE
0 out of 5(0)Adhesive sheet smooth 1mm, uncoated. Moisture proof, good adhesion,
– UV and plasticizer resistant,
high temperature resistance,
– solvent and chemical resistance,
– Splash water resistance
– square eyelet plate 45 x 45 x 1mm,
– Available with or without self-adhesive.SKU: 600.100.003 -
Fittings for Glass, Mirror Fitting, Mirrorplates
1.0 m2 Niche Magnet Professional Plus Mirror Set
0 out of 5(0)1.0 m2 Magnet professional mirror set, with four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, wall plugs. For the mounting of mirrors up to 1,0m² mirror surface, for example that must be mounted in tight niches.High-quality products in practical compilations.These sets are preferably used when there is no possibility to mount the mirror from above in tabs or eccentric discs.This is a face mount where the weight of the mirror rests on the magnet.With four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, dowels and screws.
SKU: 600.101.010