End connector for 19mm diameter Stabilizer bar made of brass consist in Bright chrome and Matt chrome finishes.Made in Europe
End Connector with 360° trunable Glass Connector for D19mm Stabilizer Bar
End connector for 19mm diameter Stabilizer bar made of brass consist in Bright chrome and Matt chrome finishes.Made in Europe.

Brand | CGAcc |
---|---|
Finish | Polished chrome, Satin chrome |
Made in | Europe |
Material | Brass |
Related products
-
Pointfixures, Fittings for Glass
Point Fixture 30xD25 with cylinder head screw
0 out of 5(0)High-quality point holder made of stainless steel V2A / EN 1.4301 / AISI 304. Matt brushed. Suitable for glass thickness 8-12 mm including rubber inserts. An M8 thread is available for mounting. Excluding fastening /mounting material. Suitable for Outdoor/ Indoor fixing. The Point stud is not adjustable on the axis.
SKU: 640.000.230 -
Fittings for Glass, Mirror Fitting, Mirrorplates
1.0 m2 Niche Magnet Professional Plus Mirror Set
0 out of 5(0)1.0 m2 Magnet professional mirror set, with four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, wall plugs. For the mounting of mirrors up to 1,0m² mirror surface, for example that must be mounted in tight niches.High-quality products in practical compilations.These sets are preferably used when there is no possibility to mount the mirror from above in tabs or eccentric discs.This is a face mount where the weight of the mirror rests on the magnet.With four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, dowels and screws.
SKU: 600.101.010 -
Fittings for Glass, Mirror Fitting, Mirrorplates
Eyelet plate round Ø 42mm Selfadheisive
0 out of 5(0)Eyelet plate round Ø42mm self-adhesive. Moisture-proof, good adhesion, UV and plasticizer resistant, high temperature resistance, solvent and chemical resistance, splash water resistance.
SKU: 600.100.001 -
Fittings for Glass, UV Bonding Fittings
4 Aluminum UV Bonding plates for glass D75 with M10 internal thread
Fittings for Glass, UV Bonding Fittings4 Aluminum UV Bonding plates for glass D75 with M10 internal thread
0 out of 5(0)Glass table adapter made of aluminum, for gluing with UV glue or suitable glue. The flanges / adhesive plates all have an internal thread and can e.g. can be used for gluing table legs. The set contains 4 pieces.
SKU: 610.500.075 -
Fittings for Glass, Knobs and Handels, Bath and shower, Simplex
Glass door knobs pair square 35×35
0 out of 5(0)Glass door knobs pair square 35 x 35 made of brass solid material. Both sides grip available in glossy or matt chrome look. Hole = 14mm, for 8 to 12mm glass. Is handy and noble in the finish
SKU: V601.504.001