No products in the cart.
End piece for stabilizer bar D19mm, clamping piece attached.
Made of brass
Polished chrome, Satin chrome
2-5 working days
10mm, 6mm, 8mm
1.0 m2 Magnet professional mirror set, with four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, wall plugs. For the mounting of mirrors up to 1,0m² mirror surface, for example that must be mounted in tight niches.High-quality products in practical compilations.These sets are preferably used when there is no possibility to mount the mirror from above in tabs or eccentric discs.This is a face mount where the weight of the mirror rests on the magnet.With four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, dowels and screws.
Adhesive sheet smooth 1mm, uncoated. Moisture proof, good adhesion,
– UV and plasticizer resistant,
high temperature resistance,
– solvent and chemical resistance,
– Splash water resistance
– square eyelet plate 45 x 45 x 1mm,
– Available with or without self-adhesive.
End connector for 19mm diameter Stabilizer bar made of brass consist in Bright chrome and Matt chrome finishes.Made in Europe.
Hinges for glass shower cubical doors for UV bonding
TEST performed with glass element:
5 + 5 + 1,52 PVB Hardened
Adhesive FIXGLASS UV 973
Stress: 20,000 opening and closing cycles
Salt mist: 168 h
Moisture resistance: 7 days at 60 ° C / 80% RH
Hold on pull-out: 50 kg / 10 min.
Eyelet plate round Ø42mm self-adhesive. Moisture-proof, good adhesion, UV and plasticizer resistant, high temperature resistance, solvent and chemical resistance, splash water resistance.