No products in the cart.
Glass adhesion additive for 2K colors
Additive to achieve permanent adhesion to glassy substrates (common types of glasses, glazed tiles and plates, etc.).
€ 61.63 – € 140.25
Get your Business Price
Wiper for bubble-free application of self-adhesive and self-adhesive films.
Available in two widths
Shipping: about 2-5 working days
Splinter protection film for application on the back of the mirror – self-adhesive. Ideal for large mirrors or semi-public areas to shatter proof mirror. If the mirror breaks, the EN 12600 standard tissue film lifts the splinters together. Not recommended for overhead glazing. If the mirror needs to be glued or fused. Cut out the foil; do not apply the adhesive or mounting plate to the foil.
The coating can be applied manually or with a sprayer suitable for flammable liquids. For manual coating, cotton pads or similar can be used.
Always apply the coating in cross moves to make sure that enough material has been applied everywhere. Pay special attention to edge areas or areas around holes or cutouts. BriteGuard® Surface SEALER has a short reaction time of only 30 minutes at approx. 20 ° room temperature.
If required, this can be flexibly adapted to the production cycle times due to the effect of temperature.
Consisting of 3 components
TÜV certified for up to 10 years
These products are no loger available:
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
Normal corundum brown belongs to the group of Electro Corundum. It is produced by reducing melt of calcined bauxite in an electric arc furnace. Normal corundum is iron-free and extremely stable.
Colour : Brown
Your email *
Your message incl. quantity and all relevant details for Best Prices.
Send a copy to your email