Glass grinding belts 1830 x 100 mm Grit 150
Print this ProductIn stock
German quality brand
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
£ 9.50 ex.VAT
In stock
Related products
-
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 31 to 40mm
Total sales: 0 pcs.0 out of 5(0)The Diamond hollow drill 1/2″ H75 mm D 31 to 40mm is a standard diamond bur 75mm high with 1/2 “thread. It is for normal use and has internal cooling. The base material is steel and the diamond coating is of sintered material. The drill must be sharpened before first use. It is made in Italy and the HS code for reference is 8207.
SKU: n/a -
Machine Tools, Drilling, H75mm Craftline-Drill
Craftline-Diamond hollow drill 1/2″ H75 mm D 41 to D50
Machine Tools, Drilling, H75mm Craftline-DrillCraftline-Diamond hollow drill 1/2″ H75 mm D 41 to D50
Total sales: 0 pcs.0 out of 5(0)Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in ChinaSKU: n/a -
Machine Tools, Abrasive belts
Cork polishing belt for high gloss polishing
Total sales: 0 pcs.0 out of 5(0)Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
SKU: 100.450.265-1 -
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 91mm to D 100mm
Total sales: 0 pcs.0 out of 5(0)The Diamond hollow drill 1/2″ H75 mm D 91mm to D 100mm is a standard diamond bur 75mm high with 1/2 “thread, for normal use. It has an internal cooling system and is made of steel with a diamond coating of sintered material. The drill must be sharpened before first use. Made in Italy, it has an HS code for reference: 8207.
SKU: n/a -
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 3mm to D10mm
Total sales: 0 pcs.0 out of 5(0)The Diamond Hollow Drill is a standard diamond bur that is 75mm high and has a 1/2″ thread. It is made with internal cooling and a steel base material. The diamond coating is made of sintered material. The drill must be sharpened before first use. It is made in Italy and the HS code for reference is 8207.
SKU: 900.200.000