No products in the cart.
Seal profile for sliding doors for glass shower doors suitable for 6 mm and 8 mm glass Lipsize = 10mm, also available in 2010mmm
For up to 0.8m² mirror surface.
– With 2 eccentric discs with adjustment scale,
– 2 mirror magnets
– 2 self-adhesive magnetic sheets 70 x 70mm
– 2 self-adhesive, folded mirror sheets 100 x 100mm. > (Attention in the picture 100×200)
The mounting accessories such as screws, wall plugs and spacers is enclosed. Profi-Plus coating.
Adhesive sheet smooth 1mm, uncoated. Moisture proof, good adhesion,
– UV and plasticizer resistant,
high temperature resistance,
– solvent and chemical resistance,
– Splash water resistance
– square eyelet plate 45 x 45 x 1mm,
– Available with or without self-adhesive.
Hinges for glass shower cubical doors for UV bonding
TEST performed with glass element:
5 + 5 + 1,52 PVB Hardened
Adhesive FIXGLASS UV 973
Stress: 20,000 opening and closing cycles
Salt mist: 168 h
Moisture resistance: 7 days at 60 ° C / 80% RH
Hold on pull-out: 50 kg / 10 min.
End connector for 19mm diameter Stabilizer bar made of brass consist in Bright chrome and Matt chrome finishes.Made in Europe.
Glass furniture, showcase castors Wheels with hard castors screwed onto stainless steel plates. Load capacity per castor 35kg. Perfect and elegant look for your glass furniture. The rollers are screwed in with an M8 thread, so other rollers can also be screwed in with an M8 threaded pin. Available in 2 adhesive flange sizes, D50 and D35. Total height = 50mm