Application area | Glass, Indoor, Metal, Plastic |
Colour | Transparent |
Consistency | Liquid |
Content | 50 ml |
Durability | See label |
E-modulus | 462 MPa |
Flash point (°C) | 10 °C |
Hardening mechanism | 2-component |
Hardness | 55 Shore D |
Layer thickness | 0.2 – 0.8 mm |
Linear shrinkage | 0.8 % |
Material | Acrylic |
Mixing ratio | 1:1 |
Package contents | 1 Cartridge |
Shear strength | 21 MPa |
Solvent-free | Yes |
Storage information | Protect from sunlight, Store cool, Store dry, Store in original container |
Storage temperature (°C) | 20 – 25 °C |
Surface bonding | No |
Temperature resistance (°C) | -30 – 150 °C |
Viscosity | 5,000 mPas |
Waterproof | No |
Verifix® 2-K-60 2 Component Structural Adhesive
Various materials can be bonded quickly and without further aids with 2K-60. The two-component structural adhesive is suitable for glass, metal, ceramics and some plastics. 2K-60 has high strength, good temperature resistance and a clear appearance.
Curing is done by mixing the two components. The use of a UV lamp is not necessary. The pot life begins when both components combine in the mixing nozzle. Therefore, a new mixing nozzle must usually be used for each bond. 2K-60 is not moisture resistant. For bonding in bathrooms, Pyrosil® should be used beforehand
- Applicable with mixing nozzle BO 5500541 and dispenser BO 5500502.
BO5500540
datasheet TD_Verifix 2k-60_840.200.007.pdf
£ 30.25 ex.VAT
Sales unit | 1 Pcs |
---|---|
Brand | Bohle |
You may also like…
-
Adhesives and Tapes, Adhesives
Pyrosil® Professional Kit
Total sales: 0 pcs.The Pyrosil manual flame treatment set is a surface silicatisation appliance that works on the principle of flame pyrolysis. A gas mixture of (propane and butane) and PYROSIL®, consisting of organosilicon compounds, burns in the flame and forms a very dense and firmly adhering SiO2 layer a few nanometres thick on metal, glass, ceramics and plastics.
Particularly suitable as an adhesion promoter for adhesives, UV bonding and UV printing on smooth surfaces.
Available in variations especially for UV bonding or UV bonding
SKU: V840.100.001 -
Adhesives and Tapes, Adhesives
Mixing nozzle Verifix® 2K-60 Bohle
Total sales: 3 pcs.Matched to the 2K-60 adhesive, this mixing nozzle ensures the correct mixing ratio of the two components. Only in this way can the adhesive achieve its full strength and the bond a good quality. A new a mixing nozzle will be required for each bond, as the mixing and curing process starts within the nozzle.
Application note:
Observe the processing instructions of the adhesive and the relevant technical guidelines and standards.BO5500541
SKU: V840.200.006