Glass grinding belts 2500x 100 mm Grit – 150
Print this ProductIn stock
German quality brand
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
€ 15.00 ex.VAT
In stock
Related products
-
Machine Tools, Drilling, H75mm Craftline-Drill
Craftline-Diamond hollow drill 1/2″ H75 mm D 31 to D40mm
Machine Tools, Drilling, H75mm Craftline-DrillCraftline-Diamond hollow drill 1/2″ H75 mm D 31 to D40mm
0 out of 5(0)Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in ChinaSKU: n/a€ 35.35 – € 43.05 ex.VAT -
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 61mm to D 70mm
0 out of 5(0)The Diamond hollow drill is a standard diamond bur 75mm high with 1/2″ thread. It is for normal use and has internal cooling. The base material is steel and the diamond coating is of sintered material. The drill must be sharpened before first use. It is made in Italy and has an HS code for reference of 8207.
SKU: n/a€ 94.50 – € 107.00 ex.VAT -
Machine Tools, Abrasive belts
Cork polishing belt for high gloss polishing
0 out of 5(0)Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
SKU: 100.450.265-1€ 3.80 – € 42.50 ex.VAT -
Machine Tools, Abrasive belts
Glass grinding belts 533 x 28 mm
0 out of 5(0)If you’re looking for a top quality glass grinding belt, look no further than our 533 x 28 mm belts. Made in Germany from top quality materials, our belts are designed to give you the best possible finish on your glass. With a high cutting ability and a fine microsection, our belts are the perfect choice for any glass grinder.
SKU: 100.406.000€ 2.95 – € 3.80 ex.VAT -
Machine Tools, Drilling, H75mm Craftline-Drill
Craftline-Diamond hollow drill 1/2″ H75 mm D 41 to D50
Machine Tools, Drilling, H75mm Craftline-DrillCraftline-Diamond hollow drill 1/2″ H75 mm D 41 to D50
0 out of 5(0)Craftline Diamond hollow drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– Drill must be sharpened before first use
– Made in ChinaSKU: n/a€ 44.45 – € 51.10 ex.VAT