Corner Clamp 90° Glass / Wall Brass
Corner Clamps 90° Glass to Wall which is made of Brass and Manufactured in Europe to meet the high-quality standard. Economical and Impressing Quality. Click here for the complete range of this series
Drucken
- Angle connector 90 ° glass/wall
- Glass thickness: 6mm & 8mm
- Recommended torque force (Nm): 10
- Brass
Corner Clamps 90° Glass to Wall which is made of Brass and Manufactured in Europe to meet the high-quality standard. Economical and Impressing Quality. Click here for the complete range of this series
| Finish | Black-Edition, Polished chrome, Satin chrome |
|---|---|
| Fitting type | Glass / Wall |
| Material | Brass |
| Made in | Europe |
| Shipping | 2-5 working days |
| Brand | CGAcc |
| Glass thickness | 6mm, 8mm |
Related products
-
Fittings for Glass, Bath and shower, UV Bonding Fittings
Glass / wall hinge for UV gluing 90 °
Hinges for glass shower cubical doors for UV bonding
TEST performed with glass element:
5 + 5 + 1,52 PVB Hardened
Adhesive FIXGLASS UV 973
Stress: 20,000 opening and closing cycles
Salt mist: 168 h
Moisture resistance: 7 days at 60 ° C / 80% RH
Hold on pull-out: 50 kg / 10 min.SKU: n/a -
Fittings for Glass, Mirror Fitting, Mirrorplates
Mirror Eyelet plate quad. 45 x 45 x 1 mm SELF ADHESIVE
Fittings for Glass, Mirror Fitting, MirrorplatesMirror Eyelet plate quad. 45 x 45 x 1 mm SELF ADHESIVE
Adhesive sheet smooth 1mm, uncoated. Moisture proof, good adhesion,
– UV and plasticizer resistant,
high temperature resistance,
– solvent and chemical resistance,
– Splash water resistance
– square eyelet plate 45 x 45 x 1mm,
– Available with or without self-adhesive.SKU: 600.100.002 -
Fittings for Glass, Mirror Fitting, Mirrorplates
1.0 m2 Niche Magnet Professional Plus Mirror Set
1.0 m2 Magnet professional mirror set, with four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, wall plugs. For the mounting of mirrors up to 1,0m² mirror surface, for example that must be mounted in tight niches.High-quality products in practical compilations.These sets are preferably used when there is no possibility to mount the mirror from above in tabs or eccentric discs.This is a face mount where the weight of the mirror rests on the magnet.With four self-adhesive gill plates 100 x 100 x 2mm, four mirror magnets Ø 45mm with eccentric bore, dowels and screws.
SKU: 600.101.010 -
