Adhesives
Showing all 5 results
-
Adhesives, Gluing and Sealing
HIGH TACK Den Braven 290 ml
Hybrid adhesive with particularly strong initial adhesion. Zwaluw High Tack is a one-component hybrid-based adhesive with high initial tack. In general, a fixation of the adhesive unit is not required. After application, the product hardens with atmospheric moisture. The adhesive is odorless, neutral and free of silicone and isocyanate. Good for gluing painted glass backs or mirrors. Not negligent to the joints
SKU: 600.120.005 -
Adhesives, Gluing and Sealing, Mirror Fitting, Mirrorglue
Mirror Adhesive Xtragrip® Cartridge × Mirror Adhesive Xtragrip® 310ml
Adhesives, Gluing and Sealing, Mirror Fitting, MirrorglueMirror Adhesive Xtragrip® Cartridge × Mirror Adhesive Xtragrip® 310ml
Solvent-free, neutral one-component adhesive based on silicone (oxymfrei). Intended for stress-compensating mirror bonding on wood, concrete, stone, glass, metal, etc. Porous surfaces must be pretreated with a primer. Not suitable for non-positive connections. Xtragrip® is easy to process, permanently elastic and does not attack the mirror coating.
Technical characteristics:
Base: polysiloxane (oxymfrei).
Consistency: stable paste
Hardening system: polymerization by humidity
Skin formation: approx. 10 min. (+ 20 ° C and 65% relative humidity) Curing speed: 1 mm / 24 hrs. (+ 20 ° C and 65% relative humidity) Density: 1.36
Thermal stability: -50 ° C to + 120 ° CSKU: 600.120.001 -
Adhesives, Gluing and Sealing
Pyrosil -Set
creation of a nanorughness
The PYROSIL process relies on the flame pyrolytic deposition of amorphous silica on the substrate material and is a form of silicatization.
The surface to be treated is passed through a gas flame, into which a silicon-containing substance, the PYROSIL, is metered. The PYROSIL, also called precursor burns and settles as amorphous silicon dioxide in a very thin (5-100 nm) but dense and firmly adhering layer on the surface. Due to the low exposure time of the flame, the surface temperature increase of the material remains moderate. The PYROSIL process is therefore not only suitable for glass, ceramics and metals, but is also excellently suited for plastics.Structured, highly-augmented surfaces with improved chemical bonding capabilities can be realized effectively and cost-efficiently with the PYROSIL® process.
SKU: 840.100.000 -