No products in the cart.
For transferring plotter templates
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and low beam depth up to 0.5 mm
Delivery time: about 2-5 working days
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
For cleaning fine limescale or water spots without damaging the surface. Can be used wet or dry. Grade pure steel wool tapes made of 1a-quality steel in packages with 200 g filling weight or 5 kg roll.
The Surface SEALER X was specially developed to protect rough surfaces.
– It may be both sandblasted and frosted glass. The material is not suitable for outdoor use.
Shipping: about 2-5 working days
Acetone is ideal for pre-cleaning the glass surface before of the primer, paint etc. Acetone evaporates on the surface without oil or moisture residues on the surface
Fine masking tape that is versatile.
Made of extra thin acrylate, for precise work, edge sharp edges
Preventing underflowing colors or primers etc.
Ideal on slightly uneven surfaces.
Can be removed up to 10 days without any problems.
Short term temperature resistant (60- 90 min) to +120? C.
Suitable for covering glass edges before painting.