No products in the cart.
For transferring fonts, logos and designs.
Delivery time: about 2-5 working days
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and low beam depth up to 0.5 mm
The Surface SEALER X was specially developed to protect rough surfaces.
– It may be both sandblasted and frosted glass. The material is not suitable for outdoor use.
Shipping: about 2-5 working days
Glass primer primer for glass painting is required as preparation for 2K paint on glass. The primer prevents chipping of paint on the glass after drying. 2nd step when painting on glass.
Please Contact us if you need any assistance or information on Paintin on Glass commercially
The stencil film for sandblasting with higher beam depths, ideal for relief structures, logos, lettering with sharp contouring
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and medium beam depth up to 2.0 mm
The coating can be applied manually or with a sprayer suitable for flammable liquids. For manual coating, cotton pads or similar can be used.
Always apply the coating in cross moves to make sure that enough material has been applied everywhere. Pay special attention to edge areas or areas around holes or cutouts. BriteGuard® Surface SEALER has a short reaction time of only 30 minutes at approx. 20 ° room temperature.
If required, this can be flexibly adapted to the production cycle times due to the effect of temperature.
Consisting of 3 components
TÜV certified for up to 10 years
These products are no loger available: