No products in the cart.
Assembly blade for bubble-free application of self-adhesive and self-adhesive films.
Shipping: about 2-5 working days
TESA – Splinter protection film for application on the back of the mirror. Ideal for large mirrors or semi-public areas. If the mirror should break, the foil standard EN 12600 raises the splinters together. Not recommended for overhead glazing.
Hotel and exhibition construction
Available in following versions:
300m x 25m
500mm x 25m
The coating can be applied manually or with a sprayer suitable for flammable liquids. For manual coating, cotton pads or similar can be used.
Always apply the coating in cross moves to make sure that enough material has been applied everywhere. Pay special attention to edge areas or areas around holes or cutouts. BriteGuard® Surface SEALER has a short reaction time of only 30 minutes at approx. 20 ° room temperature.
If required, this can be flexibly adapted to the production cycle times due to the effect of temperature.
Consisting of 3 components
TÜV certified for up to 10 years
These products are no loger available:
Glass adhesion additive for 2K colors
Additive to achieve permanent adhesion to glassy substrates (common types of glasses, glazed tiles and plates, etc.).
Fine masking tape that is versatile.
Made of extra thin acrylate, for precise work, edge sharp edges
Preventing underflowing colors or primers etc.
Ideal on slightly uneven surfaces.
Can be removed up to 10 days without any problems.
Short term temperature resistant (60- 90 min) to +120? C.
Suitable for covering glass edges before painting.
For transferring plotter templates
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and low beam depth up to 0.5 mm
Delivery time: about 2-5 working days