No products in the cart.
Glass adhesion additive for 2K colors
Additive to achieve permanent adhesion to glassy substrates (common types of glasses, glazed tiles and plates, etc.).
For transferring plotter templates
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and low beam depth up to 0.5 mm
Delivery time: about 2-5 working days
Polishing felt for removing small / nasty scratches on the glass for example during processing or assembly. The polishing felt is glued to a metal pin, with which the felt can be clamped in any hand drill. The polishing felt for glass is 80 mm in diameter and 30 mm thick. Always remove foreign material from the scratched area before polishing to avoid further scratching. With Cerium or similar polish remove the scratch within minutes. After use, it is best to wrap in a dust and dirt-free container or in a clean cloth thus avoiding adhesion of foreign material for the next time.
Glass primer primer for glass painting is required as preparation for 2K paint on glass. The primer prevents chipping of paint on the glass after drying. 2nd step when painting on glass.
Please Contact us if you need any assistance or information on Paintin on Glass commercially
For transferring fonts, logos and designs.
The stencil film for sandblasting with higher beam depths, ideal for relief structures, logos, lettering with sharp contouring
Self-adhesive sandblast sheet for sandblasting work on smooth surfaces, such as Glass or polished stone and medium beam depth up to 2.0 mm